Advertisement
③ RED GAIN (Range is different on each Mode.)
: Adjust RED Gain, and tune the sensitivity of white point.
0 → 1 → .... → 254 → 255
MANUAL
④ BLUE GAIN (Range is different on each Mode.)
: Adjust BLUE Gain, and tune the sensitivity of white point.
0 → 1 → .... → 254 → 255
MANUAL
<< SETUP MENU >>
LENS MODE
AE MODE
WB MODE
NIGHTSHOT MODE
BLC/WDR MODE
PZM SETTING
CAMERA ID SETTING
SPECIAL FUNCTION
FACTORY DEFAULT
5.8 NIGHTSHOT MODE
① NIGHTSHOT MODE
: It is used in low illumination condition. ON is Night mode, OFF is
normal state. Sensitivity of camera becomes more higher level like
BW camera.
It can be available external IR illuminator. In case of AUTO mode is
converted ON / OFF automatically according to illuminance change.
OFF → AUTO → ON → ....
MODE
② NIGHTSHOT MODE DETECT TIME
: Set time to protect susceptible conversion of ON/OFF according to
illuminance change on Auto. When illuminace keeps the state during
detect time, convert ON/OFF.
1 sec. → 2 sec. → .... → 10 sec.
DETECT TIME
③ NIGHTSHOT DETECT MODE
: It is good to use with external IR illuminator on Auto. Select CDS
sensor ON/OFF to detect the illuminance state more effectively.
BRT → CDS → BRT+CDS → ....
DETECT MODE
☞ caution
BRT means shooting scene brightness, CDS sensor's operation
depends on circumstantial brightness. Select to match with installation
circumstance.
④ Turnover LEVEL from DAY TO NIGHT
: Set the LEVEL to turnover from Day to Night.
0.1 lx → 1 lx → 10 lx → ....
D→N LEVEL
⑤ Turnover LEVEL from NIGHT TO DAY
: Set the LEVEL to turnover from Night to Day.
10 lx → 100 lx → 1000 lx → ....
N→D LEVEL
⑥ Color on Nightshot Mode
: Set Color Mode on Night Mode.
B/W → COLOR → ....
NIGHT COLOR
<< NIGHTSHOT MODE >>
MODE
DETECT TIME
DETECT MODE
D->N LEVEL
N->D LEVEL
NIGHT COLOR
RETURN
<Fig5-8. NIGHTSHOT MODE >
<< SETUP MENU >>
LENS MODE
AE MODE
WB MODE
NIGHTSHOT MODE
BLC/WDR MODE
PZM SETTING
CAMERA ID SETTING
SPECIAL FUNCTION
FACTORY DEFAULT
<Fig5-9. BLC/BMB Mode >
- 16 -
AUTO
5sec
BRT
1lx
100lx
B/W
Advertisement
