Wired Status; Network Reset - Brother HL-L8250CDN User Manual

General Information
Network
Submenu 1 Submenu 2
TCP/IP Boot Method
IP Address
Subnet Mask
Gateway
IP Boot Tries
APIPA
IPv6
-
Ethernet
-

Wired Status

-
MAC Address
Security IPsec
Restores all network settings of the internal print server to the factory settings.

Network Reset

The factory settings are shown in Bold with an asterisk.
1
### means a number within the range of 000 to 255. On connection to the network, if the machine's 'Boot Method' is 'Auto' the machine will attempt
to set the IP address and Subnet Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found, an APIPA IP address will
be allocated, such as 169. 254. [001-254]. [000-255]. If the 'Boot Method' of the machine is set to 'Static' you must manually enter an IP address
from the machine's control panel.
Menu Selections Options
- Auto* / Static / RARP /
BOOTP / DHCP
-
###.###.###.###
(000.000.000.000)*
-
###.###.###.###
(000.000.000.000)*
-
###.###.###.###
(000.000.000.000)*
- 0 / 1 / 2 / 3* / ... / 32767
- On* / Off
- On / Off*
- Auto* / 100B-FD /
100B-HD / 10B-FD /
10B-HD
- Active 100B-FD /
Active 100B-HD /
Active 10B-FD /
Active 10B-HD /
Inactive / Wired OFF
- -
- On / Off*
Descriptions
Chooses the IP method
that best suits your needs.
Enter the IP address.
1
Enter the Subnet mask.
1
Enter the Gateway
1 address.
Specifies the number of
attempts the machine will
try to obtain an IP address
when the Boot Method is
set to any setting except
Static.
Automatically allocates
the IP address from the
link-local address range.
Enables or disables the
IPv6 protocol.
Chooses Ethernet link
mode.
Displays Ethernet link
status.
Displays MAC address of
the machine.
IPsec is an optional security
feature of the IP protocol
that provides authentication
and encryption services.
We recommend contacting
your network administrator
before changing this
setting.
3
1
98