Wired Status; Network Reset - Brother HL-L2310D Online User's Manual

Level 1 Level 2
Wi-Fi Status Info.
Direct
I/F Enable
Network -
Reset
1 On connection to the network, if the machine's 'Boot Method' is 'Auto' the machine will attempt to set the IP address and Subnet Mask
from a boot server such as DHCP. If a boot server cannot be found, an APIPA IP address will be allocated, such as 169. 254. [001-254].
[000-255]. If the 'Boot Method' of the machine is set to 'Static' you must manually enter an IP address from the machine's control panel.
[Network] (HL-L2370DN)
Level 1 Level 2
TCP/IP Boot Method -
IP Address
Subnet Mask -
Gateway
Node Name
WINS Config -
WINS Server Primary
DNS Server
APIPA
IPv6
Ethernet -

Wired Status

-
MAC Address -

Network Reset -

1 On connection to the network, if the machine's 'Boot Method' is 'Auto' the machine will attempt to set the IP address and Subnet Mask
from a boot server such as DHCP. If a boot server cannot be found, an APIPA IP address will be allocated, such as 169. 254. [001-254].
[000-255]. If the 'Boot Method' of the machine is set to 'Static' you must manually enter an IP address from the machine's control panel.
[Network] (HL-L2375DW/HL-L2376DW/HL-L2385DW/HL-L2386DW)
Level 1 Level 2
Wired LAN TCP/IP
Level 3 Level 4
Speed -
- -
- -
Level 3 Description
Choose the IP method that best suits your needs.
- Enter the IP address.
Enter the Subnet mask.
- Enter the Gateway address.
- Enter the Node name.
Select the WINS configuration mode.
Specify the IP address of the primary WINS server.
Secondary Specify the IP address of the secondary WINS server.
Primary Specify the IP address of the primary DNS server.
Secondary Specify the IP address of the secondary DNS server.
- Allocate the IP address from the link-local address range
automatically
- Enable or disable the IPv6 protocol.
- Choose the Ethernet link mode.
- Display the Ethernet link status.
- Display the MAC address of the machine.
- Restore all network settings of your machine to the factory settings.
Level 3 Level 4
Boot Method -
IP Address -
Subnet Mask -
Gateway -
Node Name -
WINS Config -
WINS Server Primary
Secondary Specify the IP address of the secondary WINS
Descriptions
Display the connection speed when the Status
is G/O Active or Client Active.
Enable or disable the Wi-Fi Direct connection.
Restore all network settings of your machine to
the factory settings.
1
.
Descriptions
Choose the IP method that best suits your
needs.
Enter the IP address.
Enter the Subnet mask.
Enter the Gateway address.
Enter the Node name.
Select the WINS configuration mode.
Specify the IP address of the primary WINS
server.
server.
239