Brother HL-L8250CDN User Manual page 101

General Information
Paper Tray
Submenu
Tray Use
Priority
2-sided
MP Size
Tray1 Size
1
Tray2 Size
Check Size
The factory settings are shown in Bold with an asterisk.
1
When Tray 2 is installed.
Options
Auto* / MP Only / Tray1 Only /
1
Tray2 Only
(Without Tray2 installed)
MP>T1* / T1>MP
(With Tray2 installed)
MP>T1>T2 / MP>T2>T1 /
T1>T2>MP / T2>T1>MP
On(Long Bind) / On(Short
Bind) / Off*
A4* / Letter /JIS B5 / B5 / A5 /
A5 L / A6 / Executive / Legal /
Folio / Com-10 / Monarch / C5 /
DL / 16K(195x270mm) /
16K(184x260mm) /
16K(197x273mm)
A4* / Letter /JIS B5 / A5 / A5
L / A6 / Executive / Legal /
Folio / 16K(195x270mm) /
16K(184x260mm) /
16K(197x273mm)
A4* / Letter / JIS B5 / A5 /
Executive / Legal / Folio /
16K(195x270mm) /
16K(184x260mm) /
16K(197x273mm)
Off / On*
Descriptions
Select the tray that will be used.
When Auto is chosen in Tray Use, the machine
chooses the order in which it uses the paper trays
that contain paper of the same size.
Select whether to print on both sides of the paper.
Select the size of paper you are loading in the MP
tray.
Choose the size of paper you loaded in the
standard paper tray.
Choose the size of paper you loaded in the
optional lower tray (Tray 2).
Select whether to display the message telling you
to check that the size of the paper in the machine
and the machine's Paper Size setting match.
3
93