NETGEAR ReadyNAS 102 Hardware Manual page 80

b. Place the new 2.5-inch HDD or SSD in the disk tray.
c. Secure the HDD or SSD to the disk tray using the screws.
Make sure that the disk connectors face the interior of the disk tray.
The following figures show fully assembled disk trays with a 2.5-inch HDD or 2.5-inch
SSD:
Disk tray with 2.5-inch HDD
WARNING:
To prevent damage to your system, make sure that the disk tray is
correctly oriented before inserting it into the drive bay.
4. Insert the disk tray back into the drive bay of the storage system.
• For 2-bay and 4-bay systems, insert the disk tray so that the disk tray release latch is
near the bottom of the system.
• For 6-bay systems, insert the disk tray so that the disk tray release latch is on the left
side of the system.
5. Press down on the disk tray handle until it latches closed.
The disk tray is secured in the dive bay.
ReadyNAS OS 6 Desktop Storage Systems
Disks
80
Disk tray with 2.5-inch SSD