Table of Contents
Advertisement
The disk tray is secured in the dive bay.
If the volume that contained the failed disk uses a protected RAID configuration, the
system automatically resynchronizes the volume using the new disk. Resynchronization
might take several hours, depending on the disk size. You can continue to use your
storage system, although access is slower until the volume resynchronization finishes.
For more information about RAID configurations, see the ReadyNAS OS 6 Software
Manual, which is available at
To replace a 2.5-inch hard disk drive (HDD) or 2.5-inch solid-state drive (SSD):
1.
If necessary, slide the disk tray handle locking mechanism to the unlocked position.
2.
Press the disk tray release latch.
The tray handle pops out.
3.
Pull out the disk tray and replace the 2.5-inch HDD or SSD:
a. Remove the screws and the old 2.5-inch HDD or SSD.
ReadyNAS OS 6 Desktop Storage Systems
http://support.netgear.com/product/ReadyNAS-OS6.
Disks
79
Hide quick links:
Advertisement
Table of Contents
