Table of Contents
Advertisement
7.
Push the mounting bracket and HDD back into the disk tray.
The following figure shows a fully assembled disk tray:
WARNING:
To prevent damage to your system, make sure that the disk tray is
correctly oriented before inserting it into the drive bay.
8.
Insert the disk tray back into the drive bay of the storage system.
•
For 2-bay and 4-bay systems, insert the disk tray so that the disk tray release latch is
near the bottom of the system.
•
For 6-bay systems, insert the disk tray so that the disk tray release latch is on the left
side of the system.
9.
Press down on the disk tray handle until it latches closed.
The disk tray is secured in the dive bay.
10.
If necessary, turn on your system by pressing the Power button.
If the disk that you added was not previously formatted, the system uses the disk in one
of the following ways:
ReadyNAS OS 6 Desktop Storage Systems
Disks
71
Hide quick links:
Advertisement
Table of Contents
