NETGEAR ReadyNAS 102 Hardware Manual page 74

c. Release the mounting bracket from the locking mechanism by pushing a pen
through the locking mechanism on the side of the disk tray.
d. Slide the mounting bracket out of the disk tray.
The mounting bracket is not used to secure 2.5-inch HDDs or SSDs.
6. Place the new 2.5-inch HDD or SSD in the disk tray.
7. Secure the HDD or SSD to the disk tray using the screws that came with your storage
system.
Make sure that the HDD or SSD connectors face the interior of the disk tray.
ReadyNAS OS 6 Desktop Storage Systems
Disks
74
Disk tray locking mechanism