Network Connection And Setup; Configuring Network Video Decoder In; Connection - Samsung SPD-400 User Manual

network connection and setup

You can configure the Network Video Decoder's network settings to your preference.
CONFIGURING NETWORK VIDEO DECODER IN LAN
ENVIRONMENTS
Accessing the Network Video Decoder from a PC within the same LAN
1. Launch an Internet browser on the local PC.
2. Enter the IP address of the Network Video Decoder into the browser's address field.
Network Video Decoder
Network Camera
Local PC
<Local Network>

M
A remote PC in an external Internet out of the LAN network may not be able to connect to the
network video decoder installed in the intranet if a firewall is set.
In this case, to resolve the problem, contact your network administrator.

The default IP address is set to 192.168.1.200.
To change the IP address, use the IP Installer.
For further details on IP Installer use, refer to "Static IP Setup". (Page 23)
Switch
INTERNET
HUB
Firewall
Network Camera
DDNS Server
(Data Center, KOREA)
English _19