Samsung SPD-400 User Manual page 26

network connection and setup
Auto Network Setup
Run <IP Installer_vX.XX.exe> to display the network device search list.
At the initial startup, both [Auto Set] and [Manual Set] will be grayed out.

M
For network devices found with the IPv6 setting, these buttons will be grayed out as the cameras
do not support this function.
1. Select a network device from the
search result.
Find the MAC (Ethernet) address labeled
on the rear of the network device.
Both the [Auto Set] and [Manual Set]
buttons will be activated.
2. Click [Auto Set].
The Auto Setting dialog appears.
The <IP Address>, <Subnet Mask>, and <Gateway> will be set automatically.
3. Enter the password.
This is the login password for the
"admin" user who accesses the
network video decoder.
The default password is "4321".

The default password can be exposed to a
hacking thread so it is recommended to
change the password after installing the
product.
Note that the security and other related
issues caused by the unchanged password
shall be responsible for the user.
4. Click [OK].
Auto network setup will be completed.
26_ network connection and setup