Nat - D-Link GO-DSL-N150 User Manual

The following table describes the parameters and buttons of this page:
Field
Destination IP
Address
IP Subnet
Mask
Gateway IP
Address
Metric

3.5.3 NAT

Click Advanced Setup > NAT, the page shown in the following figure appears. In
this page, you can set up the NAT (Network Address Translation) function for
your ADSL router. This function allows you to share one WAN IP address for
multiple computers on your LAN.
Enter the IP address of the destination device.
Enter the subnet mask of the destination device.
You can enter the IP address of the next hop in the IP
route to the destination device, or bind with a pvc
interface.
The metric cost for the destination.
31
GO-DSL-N150
Description
User Manual