Adsl; Access Management; Acl - D-Link GO-DSL-N150 User Manual

3.5.6 ADSL

Click Advanced Setup > ADSL, the page shown in the following figure appears.
The ADSL feature can be selected when you meet the physical connection
problem. Please check the proper settings with your Internet service provider.
The router supports these modulations: G.Lite, T1.413, G.DMT, ADSL2,
ADSL2+ and Auto Sync-Up. The router negotiates the modulation modes with
the DSLAM.
The following table describes the parameters and buttons of this page:
Field
ADSl Mode
ADSL Type

3.6 Access Management

In the navigation bar, click Access Management. The Access Management
page that is displayed contains ACL, Filter, SNMP, UPnP and DDNS.

3.6.1 ACL

Choose Access Management > ACL, and the page shown in the following
figure appears. The user may remotely access the ADSL Router once setting his
IP as a Secure IP Address through selected applications. With the default IP
0.0.0.0, any client would be allowed to remotely access the ADSL Router.
Choose Auto Sync-Up, ADSL2+, ADSL2, G.DMT,
T1.413 or G.lite. The default is Auto Sync-Up.
Choose ANNEX A, ANNEX I, ANNEX A/L, ANNEX M
or ANNEX A/I/J/L/M.
42
GO-DSL-N150
Description
User Manual