Interface Setup; Internet - D-Link GO-DSL-N150 User Manual

After setting, click NEXT, the page as shown in the following figure appears.
Click BACK to modify the settings.
Click NEXT to save the settings.
Click EXIT to cancel the settings.
Note:
After you saving the settings in the Quick Start page, you can view this wan
connection settings in the Interface Setup > Internet page.

3.4 Interface Setup

In the navigation bar, click Interface Setup. The Interface Setup page that is
displayed contains Internet, LAN and Wireless.
3.4.1

Internet

Choose Interface Setup > Internet. The Internet page that is displayed contains
ATM VC, Qos and Encapsulation. In this page, you can configure WAN
interface of your router.
GO-DSL-N150
15
User Manual