System Memory Support; Memory Configurations: Small Form Factor / Towers - HP ProDesk 600 Quickspecs

QuickSpecs
Technical Specifications – Memory

System Memory Support

The HP ProDesk 600 G1 Business PC supports 4rd generation Intel® Core™ processor families. Based on a new PC micro-architecture,
the processor is designed for a two-chip platform consisting of a processor and Platform Controller Hub (PCH). Unlike previous
generations, the processor includes an integrated memory controller (IMC). The IMC supports DDR3 protocols with two independent,
64-bit wide channels each accessing one or two DIMMs.
Two channels of non-ECC DDR3 unbuffered dual in-line memory modules (UDIMM) or DDR3 unbuffered small outline dual in-line
memory modules (SO-DIMM) with a maximum of two DIMMs per channel
Single-channel and dual-channel memory organization modes
Data burst length of eight for all memory organization modes
DDR3 memory data transfer rates of up to 1600 MT/s; actual supported DDR3 data transfer rate determined by the configured
processor.
64-bit wide channels
DDR3 system memory I/O voltage of 1.5V
Theoretical Maximum Memory Bandwidth:
10.6 GB/s in single-channel mode of 21.3 GB/s in dual-channel mode assuming DDR3 1333 MT/s
12.8 GB/s in single-channel mode or 25.6 GB/s in dual-channel mode assuming DDR3 1600 MT/s
32 GB maximum memory support depending upon available number of DIMM sockets
DDR3-1600 (PC3-12800) DIMMs are supported but limited to the 1333 MT/s data transfer rate when not configured with
IvyBridge generation chipset.
CAUTION: You must shut down the computer and disconnect the power cord before adding or removing memory modules. Regardless
of the power-on state, voltage is always supplied to the memory modules as long as the computer is plugged in to an active AC outlet.
Adding or removing memory modules while voltage is present may cause irreparable damage to the memory modules or system board.

Memory Configurations: Small Form Factor / Towers

Slot 1 is black and must always be populated. Not all memory configurations possible are represented below.
NOTE: For systems configured with more than 3 GB of memory and a 32-bit operating system, all memory may not be available due to
system resource requirements. Addressing memory above 4 GB requires a 64-bit operating system.
Total Memory
4 GB (dual channel)
8 GB (dual channel)
16 GB (dual channel)
Channel A (black)
1 (black)
4 GB
4 GB
8 GB
DA - 14654 North America — Version 1 — June 17, 2013
HP ProDesk 600 G1 Business Series Desktop
Socket
2 (white) 3 (white)
unpopulated 1 GB
2 GB
4 GB 4 GB
Channel B (black)
4 (white)
unpopulated
GB GB
4 GB
Page 35