Important Notes - Sharkoon 5-BAY RAID BOX Manual

Data from an existing RAID 0 or Combined mode
are lost. Change the defective HDD and delete the
RAID array (s. 5.2).
5.5 Rebuild
Note:
The new HDD must provide at least the same
capacity as the replaced one.
Do not change the RAID mode prior to the rebuilding.
Do not change the HDD order before commencing
the rebuild process.
1. Switch off the device.
2. Change the defective HDD.
3. Power on the device, the rebuild procedure
will start automatically even when the device
is disconnected from your PC.

6. Important notes

After 5 minutes of inactivity the device will switch
to sleep mode. During sleep mode all HDDs and
the built-in fans will be switched off.
Sleep mode ends as soon as the device is accessed.
5-BAY RAID BOX