Pc Health Status - Gigabyte GA-G41M-Combo User Manual

2-10 PC Health Status

Reset Case Open Status
Case Opened
Vcore
DDR
+3.3V
+12V
Current CPU Temperature
Current CPU FAN Speed
Current SYSTEM FAN Speed
CPU Warning Temperature
CPU FAN Fail Warning
SYSTEM FAN Fail Warning
CPU Smart FAN Control
higf : Move Enter: Select
F5: Previous Values
Reset Case Open Status
Keeps or clears the record of previous chassis intrusion status. Enabled clears the record of previous
chassis intrusion status and the Case Opened field will show "No" at next boot. (Default: Disabled)
Case Opened
Displays the detection status of the chassis intrusion detection device attached to the motherboard CI
header. If the system chassis cover is removed, this field will show "Yes", otherwise it will show "No". To
clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to
the CMOS, and then restart your system.
Current Voltage(V) Vcore/DDR/+3.3V/+12V
Displays the current system voltages.
Current CPU Temperature
Displays current CPU temperature.
Current CPU/SYSTEM FAN Speed (RPM)
Displays current CPU/system fan speed.
CPU Warning Temperature
Sets the warning threshold for CPU temperature. When CPU temperature exceeds the threshold,
BIOS will emit warning sound. Options are: Disabled (default), 60
90 C/194 F.
o o
CPU/SYSTEM FAN Fail Warning
Allows the system to emit warning sound if the CPU/system fan is not connected or fails. Check the fan
condition or fan connection when this occurs. (Default: Disabled)
CPU Smart FAN Control
Enables or disables the CPU fan speed control function. Enabled allows the CPU fan to run at different
speed according to the CPU temperature. You can adjust the fan speed with EasyTune based on system
requirements. If disabled, CPU fan runs at full speed. (Default: Enabled)
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
PC Health Status
+/-/PU/PD: Value
F6: Fail-Safe Defaults
[Disabled]
No
1.300V
1.584V
3.280V
12.112V
32 C
o
2872 RPM
0 RPM
[Disabled]
[Disabled]
[Disabled]
[Enabled]
F10: Save
- 51 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
C/140 F, 70 C/158 F, 80
o o o o
C/176 F,
o o
BIOS Setup