Black/White Level; Cinema Mode; Colour Temperature; Static Gamma - Toshiba 32AV83*B Series User Manual

Black/White Level

This function increases the strength of dark
areas of the picture, which improves picture
definition.
In the Picture Settings menu, press ▲
or ▼ to select Black/White Level.
Press ◄ or ► to adjust the level from
Off, Low, Middle to High. The effect
depends on the broadcast and is most
noticeable on dark colours.

Cinema Mode

A movie film's picture runs at 24 frames a second,
whereas movie software such as DVD, etc., that
you enjoy watching on television at home runs
at 30 (NTSC) or 25 (PAL) frames a second. To
convert this signal to reproduce a smooth motion
and picture quality, select the Cinema mode.
In the Picture Settings menu, press ▲
or ▼ to select Cinema Mode.
Press ◄ or ► to select On or Off.

Colour Temperature

Colour Temperature increases the 'warmth' or
"coolness" of a picture by increasing the red or
blue tint.
In the Picture Settings menu, press ▲
or ▼ to select Colour Temperature.
Press ▲ or ▼ to select Colour Tem-
perature and press ◄ or ► to select
Medium, Cool or Warm to suit your
preference.
Colour Temperature
Colour Temperature
Red Level
Blue Level
Green Level
Press ▲ or ▼ to select Red Level, Blue
Level or Green Level and press ◄ or ►
to adjust the settings as required.
The static gamma feature allows you to adjust
the levels of black in the picture.
This feature resets all picture settings to the
factory settings.
In the Picture Settings menu, press ▲ or ▼
to select Reset and press
NOTE: If any picture settings have not been
When Active Backlight Control is activated,
it will automatically optimise the backlighting
levels for dark scenes.
When 3D Colour management is set to On it
allows the "Base colour adjustment" feature to
become available.
You can adjust the picture colour quality by
selecting from 6 base colour adjustments :
Medium Red, Green, Blue, Yellow, Magenta or Cyan.
0
0
0
NOTE: When a DVD movie with subtitle is
43

Static Gamma

In the Picture Settings menu, press ▲
or ▼ to select Static Gamma.
Press ◄ or ► to select the number of
Static Gamma (-5~+5).

Reset

changed, Reset is not available.

Active Backlight

Press MENU. Press ◄ or ► to select
PICTURE and press
submenu..
Press ▲ or ▼ to select Active Backlight
Control.
Press ◄ or ► to select On or Off.

3D Colour Management

In the PICTURE menu, press ▲ or ▼ to
select 3D Colour Management.
Press ◄ or ► to select On or Off.
playing back, this mode may not work
correctly.
to reset settings.
to enter the