Hdmi-Link Menus; One Touch Play; System Standby; System Audio Control - Toshiba 32AV83*B Series User Manual

By activating the Enable HDMI-LINK feature in the HDMI-LINK setup menu, individual HDMI-LINK
features can then be activated.

One Touch Play

The function of HDMI-LINK will automatically
power on the television that was in standby
mode and switch the television's input source
to the port connected with the audio/video
equipment by powering-on or playing from the
audio/video equipment.
NOTE: This feature is dependent on the
connected equipment and television
setting.

System Standby

This feature automatically switches the con-
nected equipment into standby when the
television goes into standby and conversely
for the television to switch into standby when
connected equipment goes into standby. It is
selected in the HDMI-LINK setup menu.
NOTE: This feature is dependent on the
connected equipment and television
setting.

System Audio Control

Using the Speaker Preference feature allows
the televisions remote control to adjust the
volume or mute the sound of the speakers con-
nected to the television via an AV amplifier.
Ensure that the connected AV amplifier and
HDMI-LINK equipment are selected in the
input source selection and that the Speaker
Preference is set to Audio Receiver in the
HDMI-LINK setup menu.
NOTE: When the AV Amplifier is switched on,
its input source changed or the volume
adjusted, the sound will be output from
the AV Amplifier's speakers even if TV
Speakers has been selected. Turn the
television off then on again to output
the sound from the TV's speakers.
The full function may not work and is depend-
ent on the Amplifier being used.

HDMI-LINK Menus

When the Enable HDMI-LINK is set to On, it
allows the other functions to be enabled.
The Auto Power On setting allows the televi-
sion to be automatically switched On or Off if a
HDMI-LINK device is turned On or Off.
53

Enable HDMI-LINK

Press MENU. Press ◄ or ► to select
PREFERENCES and press
the submenu.
PICTURE SOUND SETUP
Press ▲ or ▼ to select HDMI-LINK Set-
up, and press to enter the submenu.
PREFERENCES
HDMI−LINK Setup
Teletext
Panel Lock
Auto Format
4:3 Stretch
Blue Screen
Side Panel
Enter
OK RETURN
Press ▲ or ▼ to select Enable HDMI-
LINK, and press ◄ or ► to select On or
Off.
HDMI-LINK Setup
Enable HDMI−LINK

Auto Power On

Auto Standby
Amplifier Control
Speaker Preference
Edit
RETURN
Auto Power On
In the HDMI-LINK Setup menu, press ▲
or ▼ to select Auto Power On.
Press ◄ or ► to select On or Off.
to enter
APPLICATIONS
PREFERENCES
OK
Auto
Off
On
Off
On
1
Back
On
On
On
On
TV Speakers
Back