Frequently Asked Questions - Toshiba 32AV83*B Series User Manual

Q
Why is there no sound or picture?
A
Check that the television is on and that
all connections are made properly.
Q
There is a picture, but why is there little
or no colour?
The colour is factory set to Auto to auto-
matically display the best colour system.
A
When using an external source, if there
is little or no colour, improvements may
sometimes be achieved.
To manually change the colour system:
With the external source playing, select
Manual setting in the SETUP menu.
Using ▲ or ▼ to choose from Auto,
NTSC 4.43, NTSC 3.58, SECAM or PAL.
Manual setting
Colour system: Auto
EXT 1
Select Change
Q
Why doesn't the video/DVD being
played show on-screen?
Make sure the VCR or DVD player is
A
connected to the television, then select
the correct input by pressing
Q
Why is there a good picture but no
sound?
Check all cable connections and that
A
the volume has not been turned down or
that the sound has not been muted.

Frequently Asked Questions

A
Save Back
OK RETURN
.
Q
What else can cause a poor picture?
Interference or a weak signal. Try a
A
different television station. Manual fine
tuning may help:
Select the ATV/DTV Manual Tuning in
the SETUP menu.
Highlight the station and press
press ◄ or ► to select Manual fine tuning.
1 BG
Select
Using ▲ or ▼ to adjust to get the best pic-
ture and sound. Press
Q
Why doesn't the remote control work?
A
Check that the batteries aren't dead or
inserted incorrectly.
Q
Why are there problems with text?
Good performance of text depends on
a strong broadcast signal. If the text is
unreadable or garbled, check the aerial,
A
satellite or cable connection. Go to the
main index page of the text service and
look for the User Guide. This will explain
the basic operation of text in some detail.
Q
Why are the four coloured text numbers
visible but no text?
Text has been selected while viewing an
external source. No text will appear on-
A
screen or a box may appear stating no
information is available. Select a broad-
casting channel and press
24
, then
ATV Manual Tuning
Manual fine tuning
P C 69 0 − − − − −
Change Save Back
OK RETURN
and then EXIT.
to access.