Toshiba 32A3000P Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. TV
  5. 32A3000P
  6. Manual

Toshiba 32A3000P Manual

Lcd color television
Hide thumbs
Table of Contents

Advertisement

Quick Links

Стр. 1 из 1
LCD Color Television
32A3000P
Ver. 2.00
file://D:\Documents and Settings\Admin\Рабочий стол\toshiba_32a3000p-01\32A300...
21.04.2015

Advertisement

Table of Contents
loading

Related Manuals for Toshiba 32A3000P

Summary of Contents for Toshiba 32A3000P

  • Page 1 Стр. 1 из 1 LCD Color Television 32A3000P Ver. 2.00 file://D:\Documents and Settings\Admin\Рабочий стол\toshiba_32a3000p-01\32A300... 21.04.2015...

  • Page 2: Service Mode

    ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 1 из 21 ADJUSTMENT Service Mode Entering to Service Mode 1. Set VOLUME to minimum and press button once on remote control. ↓ ↓ ↓ ↓ 2. Press button again and hold button down. ↓...
  • Page 3 ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 2 из 21 Displaying the Adjustment Menu Press MENU button on TV. Service Mode Press ↑ ↑ ↑ ↑ ↓ ↓ ↓ ↓ Press Adjustment Mode Key Function in the Service Mode The following key entry during display of adjustment menu provides special functions. CAUTION: Never try to perform initialization unless you have changed the memory IC.

  • Page 4: Setting & Adjusting Data

    ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 3 из 21 Test signal selection Selection of the adjustment items (on TV or remote control) Change of the data value Volume +/- (on TV or remote control) Adjustment menu mode ON/OFF MENU button (on TV) Initialization of the memory (QA02) CALL + CH button on TV...
  • Page 5 ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 4 из 21 Item Name of adjustment RCUT R CUT OFF GCUT G CUT OFF BCUT B CUT OFF RDRV R DRIVE GDRV G DRIVE BDRV B DRIVE BRTC BRIGHTNESS CENTER COLC COLOR CENTER UVTT BASE BAND TINT CNTX...

  • Page 6: Function Description

    ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 5 из 21 FPLG2 Channel LOGO Vector Clip SW (SD) FPLG3 Channel LOGO Vector Clip SW (HD) Factory preset data will be loaded after setting Model ID data. (Refer to Initialization of Memory Data of QA02 and setting data of signal board.) Adjusting the Data Pressing of VOLUME +/- button will change the value of data in the range from 00H to...
  • Page 7 ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 6 из 21 Setting Panel Option Data Panel option data is subject to OP4 and OP5. Enter to service mode and select menu of OPT4 or OPT5 by pressing P or P during display of adjustment menu. After selecting OPT4 or OPT5, press + or - to set OPT4 or OPT5 value as table below.
  • Page 8 ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 7 из 21 Ex. OPT5 value 0x05 indicates that panel size is 32. OPT5 (bit7) (bit6) (bit5) (bit4) (bit3) (bit2) (bit1) (bit0) Size Convert from Bit (Binary) to Hex The table for converting from bit (D7-D0) to hex (0x**). BIT (Binary) High nibble Low nibble...
  • Page 9 ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 8 из 21 E.g. If Bit D7-0 = 0101 1010, Hex data is 0x5A. Exit from Service Mode Pressing POWER button to turn off the TV once. Initialization of Memory Data of QA02 and Setting Data of Signal Unit After replacing QA02 or signal board, the following initialization is required.
  • Page 10 9) Check the picture carefully. If necessary, adjust any adjustment item above. Perform "Auto tune" on the owner's manual. MODEL ID (HEX) Model name Panel vendor 0x01 26A3000P 0x02 26A3000P 0x03 32A3000P 0x04 32A3000P 0x05 37A3000P 0x06 37A3000P 0x07 42A3000P...
  • Page 11 ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 10 из 21 0x26 0x27 0x28 0x29 0x30 0x31 0x32 0x33 Initializing Data setting flowchart after replacing the Signal Unit file://D:\Documents and Settings\Admin\Рабочий стол\toshiba_32a3000p-01\32A300... 21.04.2015...
  • Page 12 ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 11 из 21 Test Signal Selection file://D:\Documents and Settings\Admin\Рабочий стол\toshiba_32a3000p-01\32A300... 21.04.2015...
  • Page 13 ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 12 из 21 Every pressing of button on the remote control changes the built-in test patterns on screen as described below in Service Mode. Picture Signal Red raster Green raster Blue raster All Black All White Self Diagnostic Function 1.
  • Page 14 ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 13 из 21 (1) Firmware : Version information of microprocessor Series name (AAAA) and market area (BB) and software program version (0000) (2) Time : Total hour of turn the TV on. (Unit : H) (3) BL_STATUS : Counter for saving BackLight on error.
  • Page 15 ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 14 из 21 (SCART (S+AV)) (Component/Composite) HDMI1 Version Check Mode 1. Press "9" button twice on remote control during display of adjustment menu in the service mode. The version of main MPU will be checked. 2.
  • Page 16 (5) HDMI ID : HDMI ID information : Display 4 byte data. (6) SW Ver Version information of DB software as Toshiba release. (Only digital model.) (7) MW Ver Left side is Application and UI version information of DB software. (Only digital model.)
  • Page 17 ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 16 из 21 (8) A/D Adjust A/D adjustment item. --MAIN : It's enable only in double Window model. A/D adjustment status of main picture. --PIP : It's enable only in double Window model. A/D adjustment status of sub picture.

  • Page 18: Screen Size

    ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 17 из 21 * Status check display and Item are subject to the models. (1) MAIN : Main source information : Display RF position number (0 - 99) on the main screen, or Input Source (EXT1/2/3/HDMI etc.) (2) MAIN FORMAT : Display Video and PC format information...

  • Page 19: Function Description

    ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 18 из 21 Cinema 2 Super Live 1 Cinema 1 Subtitle 14:9 Note: Exact Scan is shown only for 1080p panel model with video input mode except pc. (8) OTHER STATUS : Other status information : Display three numbers of 2 byte data. Setting Hotel Mode Enter to service mode and select Hotel Mode menu by pressing P or P .
  • Page 20 ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 19 из 21 language. (Display the language only) (tuning SETUP MENU) D1 (bit1) Disable SETUP MENU Disable Enable D0 (bit0) HOTEL Mode On (Enable the setting of D1 from to D7) (Normal) VOLUX Set VOLUX as following. 1) Set speaker volume to 100.
  • Page 21 ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 20 из 21 D0 (bit0) Value above 100 is no effect. OPT8 FUNCTION DESCRIPTION 0 (Normal) D7 (bit7) ~ - (no use) D3 (bit3) D2 (bit2) Enable mode that picture mode will be set in Enable Disable forced when turn ON the main power...
  • Page 22 ADJUSTMENT [LCD Color Television] ASIA_EU Стр. 21 из 21 file://D:\Documents and Settings\Admin\Рабочий стол\toshiba_32a3000p-01\32A300... 21.04.2015...

  • Page 23: Function And Operation

    Стр. 1 из 1 FUNCTION AND OPERATION The Remote Control Simple at-a-glance reference of your remote control. file://D:\Documents and Settings\Admin\Рабочий стол\toshiba_32a3000p-01\32A300... 21.04.2015...

  • Page 24: Controls And Input Connections

    Стр. 1 из 2 FUNCTION AND OPERATION Controls and Input Connections A wide variety of external equipment can be connected to the input sockets on the side of the television. Whilst all the necessary adjustments and controls for the television are made using the remote control, the buttons on the television may be used for some functions.
  • Page 25 Стр. 2 из 2 Using the Controls and Connections file://D:\Documents and Settings\Admin\Рабочий стол\toshiba_32a3000p-01\32A300... 21.04.2015...
  • Page 26 Стр. 1 из 3 FUNCTION AND OPERATION Tuning the Television Using Quick Setup, Sorting Programme Positions Before switching on the television put your decoder and media recorder to Standby if they are connected. To set up the television use the buttons on the remote control. file://D:\Documents and Settings\Admin\Рабочий...
  • Page 27 Стр. 2 из 3 file://D:\Documents and Settings\Admin\Рабочий стол\toshiba_32a3000p-01\32A300... 21.04.2015...
  • Page 28 Стр. 3 из 3 file://D:\Documents and Settings\Admin\Рабочий стол\toshiba_32a3000p-01\32A300... 21.04.2015...

  • Page 29: Manual Tune

    Стр. 1 из 4 FUNCTION AND OPERATION Manual Tune The television can be tuned-in manually using Manual tuning. For example: if the television cannot be connected to a media recorder/decoder with a SCART lead or to tune-in a station on another System. Use left and right to move across the screen and select any of these Manual Tune options.
  • Page 30 Стр. 2 из 4 file://D:\Documents and Settings\Admin\Рабочий стол\toshiba_32a3000p-01\32A300... 21.04.2015...
  • Page 31 Стр. 3 из 4 file://D:\Documents and Settings\Admin\Рабочий стол\toshiba_32a3000p-01\32A300... 21.04.2015...
  • Page 32 Стр. 4 из 4 file://D:\Documents and Settings\Admin\Рабочий стол\toshiba_32a3000p-01\32A300... 21.04.2015...
  • Page 33 Стр. 1 из 2 FUNCTION AND OPERATION Auto Tune Using Auto Tuning file://D:\Documents and Settings\Admin\Рабочий стол\toshiba_32a3000p-01\32A300... 21.04.2015...
  • Page 34 Стр. 2 из 2 file://D:\Documents and Settings\Admin\Рабочий стол\toshiba_32a3000p-01\32A300... 21.04.2015...

  • Page 35: Safety Instruction

    Handling the LCD Module Стр. 1 из 4 SAFETY INSTRUCTION Handling the LCD Module Safety Precaution In the event that the screen is damaged or the liquid crystal (fluid) leaks, do not breathe in or drink this fluid. Also, never touch this fluid. Such actions could cause toxicity or skin irritation. If this fluid should enter the mouth, rinse the mouth thoroughly with water.
  • Page 36 Handling the LCD Module Стр. 2 из 4 3. If the panel surface becomes soiled, wipe with cotton or a soft cloth. If this does not remove the soiling, breathe on the surface and then wipe again. If the panel surface is extremely solied, use a CRT cleaner as a cleaner. Wipe off the panel surface by drop the cleaner on the cloth.
  • Page 37 Handling the LCD Module Стр. 3 из 4 6. CMOS-LSI circuitry is used in the LCD module, so avoid damage due to static electricity. When handling the module, use a wrist ground or anchor ground. 7. Do not expose the LCD module to direct sunlight or strong ultraviolet rays for an extended period of time.
  • Page 38 Handling the LCD Module Стр. 4 из 4 10. When transporting the LCD module, do not use packing containing epoxy resin (amine) or silicon resin (alcohol or oxim). The gas generated by these materials can cause loss of polarity. file://D:\Documents and Settings\Admin\Рабочий стол\toshiba_32a3000p-01\32A300... 21.04.2015...

  • Page 39: Panel Identification

    Стр. 1 из 2 PANEL IDENTIFICATION Panel Identification If the several panels are alternatively used in the same model without amending the model name, the identification marking will be shown at the last digit of the set serial number on the specification label on the back cover.
  • Page 40 Стр. 2 из 2 file://D:\Documents and Settings\Admin\Рабочий стол\toshiba_32a3000p-01\32A300... 21.04.2015...
  • Page 41 U02A U03B LOW-B U01A POWER U04A U03A Main Front-AV U03C...

  • Page 42: Safety Precaution

    Стр. 1 из 4 SAFETY INSTRUCTION WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "SAFETY PRECAUTION" AND "PRODUCT SAFETY NOTICE" INSTRUCTIONS BELOW. Safety Precaution WARNING: SERVICING SHOULD NOT BE ATTEMPTED BY ANYONE UNFAMILIAR WITH THE NECESSARY PRECAUTIONS ON THIS RECEIVER. THE FOLLOWING ARE THE NECESSARY PRECAUTIONS TO BE OBSERVED BEFORE SERVICING THIS CHASSIS.
  • Page 43 Стр. 2 из 4 inflammability, voltage resistance, etc. therefore, use only replacement parts that have these same characteristics. Use only the specified parts when the mark is indicated in the circuit diagram or parts list. 7. Parts mounting and routing dressing of wirings should be the same as that used originally.
  • Page 44 Стр. 3 из 4 Resistance values in orms ( ). V: Voltmeter or oscilloscope (r.m.s. or peak reading) Input resistance : Input capacitance : 200 pF Frequency range : 15 Hz to 1 MHz and d.c. respectively Note: Appropriate measures should be taken to obtain the correct value in case of non sinusoidal waveforms.

  • Page 45: Product Safety Notice

    Стр. 4 из 4 Product Safety Notice Many electrical and mechanical parts in this chassis have special safety-related characteristics. These characteristics are often passed unnoticed by a visual inspection and the protection afforded by them cannot necessarily be obtained by using replacement components rated for higher voltage, wattage, etc.

  • Page 46: Specification

    Стр. 1 из 2 SPECIFICATION file://D:\Documents and Settings\Admin\Рабочий стол\toshiba_32a3000p-01\32A300... 21.04.2015...
  • Page 47 Стр. 2 из 2 file://D:\Documents and Settings\Admin\Рабочий стол\toshiba_32a3000p-01\32A300... 21.04.2015...
  • Page 48 Digital BOARD P212B (A3030D ONLY) Audio OUT CVBS CVBS OUT PJ212 IC302 Serial port Audio Amp for debug ITU-R656 P200B H801 Digital VIDEO OUT +Low B PJ400 AC INPUT& IC301 Tuner UART DVB-CI×1 IC801 POWER BOARD POWER BOARD IF Amp Audio DAC COFDM Demod IC401...

  • Page 56: Schematic Diagram

    Стр. 1 из 2 SCHEMATIC DIAGRAM Precaution WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "X-RAY RADIATION PRECAUTION" FOR DIRECT VIEW CTV ONLY, "SAFETY PRECAUTION" AND "PRODUCT SAFETY NOTICE" OF THIS MANUAL. CAUTION: The international hazard symbols " " in the schematic diagram and the parts list designate components which have special characteristics important for safety and should be replaced only with types identical to those in the original circuit or specified in the parts list.
  • Page 57 Стр. 2 из 2 = Electrolytic capacitor = Mylar capacitor 3. The parts indicated with " " have special characteristics, and should be replaced with identical parts only. 4. Voltages read with DIGITAL MULTI-METER from point indicated to chassis ground, using a color bar signal with all controls at normal, line voltage at nominal AC volts.
  • Page 78 Стр. 1 из 1 Find Clear file://D:\Documents and Settings\Admin\Рабочий стол\toshiba_32a3000p-01\32A300... 21.04.2015...
  • Page 126 Стр. 1 из 2 CABINET Stand Exploded View A425 A426 A427 A428 A429 file://D:\Documents and Settings\Admin\Рабочий стол\toshiba_32a3000p-01\32A300... 21.04.2015...
  • Page 127 Стр. 2 из 2 file://D:\Documents and Settings\Admin\Рабочий стол\toshiba_32a3000p-01\32A300... 21.04.2015...

  • Page 128: Parts List

    Стр. 1 из 2 PARTS LIST Precaution WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "X-RAY RADIATION PRECAUTION" FOR DIRECT VIEW CTV ONLY, "SAFETY PRECAUTION" AND "PRODUCT SAFETY NOTICE" OF THIS MANUAL. CAUTION: The international hazard symbols " " in the schematic diagram and the parts list designate components which have special characteristics important for safety and should be replaced only with types identical to those in the original circuit or specified in the parts list.
  • Page 129 Стр. 2 из 2 : Metal Film : Fusible Resistor All CD and PF capacitors are ±5 %, 50 V and all resistor, ±5 %, 1/6 W unless otherwise noted. file://D:\Documents and Settings\Admin\Рабочий стол\toshiba_32a3000p-01\32A300... 21.04.2015...

Table of Contents