TP-Link TL-R470T+ User Manual page 20

Load balance broadband router

Hide thumbs Also See for TL-R470T+:

Table of Contents

LAN - This field displays the current information for the LAN, including the "MAC address",

"IP address" and "Subnet Mask".

WAN - This field displays the parameters applied to the WAN ports of the router, including

"MAC address", "IP address", "Subnet Mask", "Default Gateway" and so on. The number of

WAN ports can be configured on the "Network→WAN Number" page. Dual WAN ports

mode is set by default.

Note:

If PPPoE/L2TP/PPTP is chosen as the WAN connection type, the Disconnect button will be

shown here while you are accessing the Internet. You can also cut the connection by clicking the

TL-R470T+

Load Balance Broadband Router User Guide

Figure 4-1

Table of Contents