Samsung NC221 User Manual page 46

2
Using "PCoIP"
Figure 2-11: Display
Enable display override

This option is intended for legacy systems. It configures the client to send default
to the host when a monitor cannot be detected or is not attached to the client. In versions of
Windows prior to Windows 7, once the host had no
were attached and would never recheck. This option ensures that the host always has
information when the client is in session.
The following default resolutions are advertised when this option is enabled:
800x600 @ 60 Hz

1024x768 @ 60 Hz (native resolution advertised)

1280x800 @ 60 Hz

1280x960 @ 60Hz

1280x1024 @ 60 Hz

1600x1200 @ 60 Hz

1680x1050 @ 60 Hz

1920x1080 @ 60 Hz

1920x1200 @ 60 Hz

Configuration
EDID information, it would assume no monitors
2 Using "PCoIP"
EDID information
EDID
46