Samsung NC221 User Manual page 40

2
Using "PCoIP"
Figure 2-4: IPv6
Enable IPv6

Enable this field to enable IPv6 for your PCoIP devices.
Link Local Address

This field is automatically populated.
Gateway

Enter the gateway address.
Enable DHCPv6

Enable this field to set up Dynamic Host Configuration Protocol version 6 (DHCPv6) for your device.
Primary DNS

The primary DNS IP address of the device. If DHCPv6 is enabled, this field is automatically populated
by the DHCPv6 server.
Secondary DNS

The secondary DNS IP address of the device. If DHCPv6 is enabled, this field is automatically
populated by the DHCPv6 server.
Domain Name

The domain name used (e.g., 'domain.local') for the host or client. If DHCPv6 is enabled, this field is
automatically populated by the DHCPv6 server.
FQDN

The fully qualified domain name for the host or client. If DHCPv6 is enabled, this field is automatically
populated by the DHCPv6 server.
Enable SLAAC

Enable this field to set up stateless address auto-configuration (SLAAC) for your devices.
Configuration
40
2 Using "PCoIP"