Depth - Invacare Pronto M50 Owner's Manual

Depth

NOTE: For this procedure, refer to FIGURE 8.1.
1. Remove the quick release pin that secures the footboard assembly to the wheelchair
frame.
Make sure the detent balls are engaged with the outer edge of the tube - otherwise,
injury and/or damage may result.
2. Adjust footboard to one (1) of three (3) mounting positions.
3. Install the quick release pin. Make sure the detent balls are engaged with the outer
edge of the tube (Detail "A" of FIGURE 8.1).
Mounting
Hole
Quick
Release Pin
FIGURE 8.1
Part No. 1125085
WARNING
Top Shroud
Three (3) Depth
Adjustment Holes
Footboard
Assembly
Detent
Ball
Adjusting the Footboard Assembly - Depth
SECTION 8—FOOTBOARD ASSEMBLY
DETAIL "A" - BOTTOM VIEW OF
FOOTBOARD
Outer Edge
of Tube
63
Pronto® M50™, M51™and M61™with SureStep™
Quick Release Pin
Detent Balls