Assembling Engine/Transmission - Arctic Cat Y-6 2006 Service Manual

FOR ARCTIC CAT ATV DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
Assembling
Engine/Transmission
1. Install the left-side crankcase seal with a seal
driver or socket. Carefully drive the seal to the
edge of the crankcase. Apply grease around the
oil seal lip.
2. Clean the contact surface of the crankcase
between the right-side half and left-side half.
Place the timing chain into the left-side crank-
case. Apply engine oil to the slot in the big end
of the connecting rod and to both crankshaft
bearings; then install the crankshaft into the
right-side half.
! CAUTION
Care must be taken when installing the crankshaft
into the right-side crankcase half to avoid jamming
the cam chain and damaging the sprocket, chain, or
crankcase.
3. Rotate the crankshaft and the connecting rod
assembly to locate the connecting rod in the cen-
ter of the cylinder opening.
www.mymowerparts.com
Back
3-22
DSC02212
DSC02213
Back to TOC
4. Install a new gasket and two dowel pins on the
left-side crankcase half.
5. Install the right-side crankcase half into the
left-side crankcase half aligning the two dowel
pins. Lightly coat the cap screw with red Loctite
#271; then tighten to specifications.
Back to Section TOC
DSC02214
DSC02215
DSC02216
DSC02217
Next