Control Box Refrigerator; Multiduct - Kenmore 795.71303.010 Service Manual

3-4 CONTROL BOX-REFRIGERATOR
1. First, remove all shelves in the refrigerator, than remove the Refrigerator control Box by loosening 2 screws.
CONTROL BOX
COVER LAMP
Fig. 6
2. Remove the Refrigerator Control Box by pulling it downward.
3. Disconnect the lead wire on the right position and separate the lamp sockets.
3-5 MULTI DUCT
1. Remove an upper and lower Cap by using a flat screwdriver, and loosen 2 screws. (Figure 7)
2. Disconnect the lead wire on the botton position.
Fig. 7
- 8 -