Mitsubishi Electric PD-5010 Service Manual page 12

TROUBLESHOOTING
• In the case of abnormality in the POWER system, such as "No power available" or "Alarm (LED flashing)"
Go to 1. Power failure (P2)
• In the case of abnormality in the VIDEO system, such as "No picture" or "Picture errors"
Go to 2. No picture displayed, picture errors (P6)
• In the case of no audio output
Go to 3. No audio output generated (P15)
If set shuts down, reset the microprocessor by pressing the <Power On> and <Input>
keys on the front panel at the same time. Hold for 5 to 6 seconds.
1