Perfectclean - Miele H 5961 B Operating And Installation Instructions

Hide thumbs Also See for H 5961 B:
Table of Contents

Advertisement

PerfectClean

Before using for the first time remove
any stickers from PerfectClean
surfaces.
The enamelled surfaces of the oven
interior and universal tray have been
treated with a special type of
enamelling called "PerfectClean".
This surface has very good anti-stick
properties and is much easier to keep
clean than conventional oven enamel, if
cleaned regularly.
Food can be taken off it more easily,
and soiling from baking and roasting is
easier to remove.
The following notes on cleaning and
care should ensure that the anti-stick
and easy clean properties of
PerfectClean last for many years.
PerfectClean surfaces can be treated
as you would treat glass.
Food can be sliced or cut up on the
PerfectClean surface in the same way
as on a baking tray with conventional
enamel.
Allow the oven and any accessories
to cool down before cleaning.
Danger of burning.
Cleaning and care
Normal soiling
Clean as soon as possible after each
use with a dishcloth, soft sponge or a
soft nylon brush, and a solution of hot
water and a little washing-up liquid. The
longer soiling is left, the harder it may
become to remove.
Stubborn soiling
Stubborn soiling, e.g. from roasting,
may need to be soaked first with a
damp sponge to loosen it and if
necessary a non-abrasive stainless
steel spiral pad or a scraper suitable for
glass can be used to remove it.
After cleaning, rinse thoroughly with
clean water. The water must run off
the surface easily. Any residual
cleaning agents will hinder this
effect.
Using oven sprays on very stubborn
soiling
Some oven cleaners contain strong
alkalines and / or abrasive materials.
Because PerfectClean enamel is
designed to be easily cleaned, the use
of these cleaners is not recommended.
However, if you still cannot get the
surface clean, an oven cleaner can be
used, but for a couple of minutes only.
Do not attempt to use on a hot oven or
accessories. Allow the PerfectClean
surfaces to cool down to room
temperature before applying an oven
spray.
55

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents