Advertisement
FRONT VIEW
R
TOP VIEW
FRONT VIEW
G
F E D
REAR VIEW
H
M
L
K
5
I. CLOCK COLOR button
Allows selecting the color of the projection and the
backlight
J. BATTERY COMPARTMENT
Accommodates 2 (two) UM-3 or AA 1.5V alkaline
batteries
K. FOCUS knob
Allows adjusting the projected image sharpness
L. FLIP button
• Flips the projected image 180° degrees
• Activates a rotation between projected time and
indoor temperature
M.ROTATE knob
Allows rotating of the projected image clockwise or
anticlockwise
SIDE/TOP VIEW
N. CONTINUOUS PROJECTION switch
Activates a continuous projection of the time or indoor
temperature
O. AC ADAPTER INPUT
Allows connecting clock with the power outlet through
the AC adapter provided
P. BUILT-IN TABLE STAND
Supports clock in a vertical position on the flat surface
Q. TIME/TEMPERATURE PROJECTOR
Projects current time or indoor temperature
R. LIGHT/SNOOZE button
Activates LED backlight and snooze
7
FRONT VIEW
A. TEMPERATURE AND ALARM WINDOW
Displays indoor temperature and alarms
B. TIME WINDOW
P
Displays time with seconds and US map
C. CALENDAR WINDOW
Q
Displays month, date, day of the week
abbreviation/year and a moon phase
D. SET
button
SIDE VIEW
• Allows programming ALARM 2 and its snooze
interval
• Activates or deactivates ALARM 2
A
E. UP (+) button
B
• Increases all function parameters
N
• Allows toggling between 12 and 24 hour time format
C
• Activates US Time Zone selection
F. DOWN (-) button
O
• Decreases all function parameters
• Activates the atomic time signal reception
• Activates a language selection mode for the day of the
week
G. SET
button
• Allows programming ALARM 1 and its snooze
I
interval
• Activates or deactivates ALARM 1
J
REAR VIEW
H. MODE button
• Activates the clock programming mode
• Allows toggling between temperature and two alarm
modes
BEFORE YOU BEGIN
• We recommend using alkaline batteries
• Avoid using rechargeable batteries. (Rechargeable
batteries cannot maintain correct power requirements).
• Insert batteries before first use, matching the polarity in
the battery compartment
• Remove protective plastic screen from LCD display (if
any)
NOTE: The Color Changing Projection Clock does not
work without the batteries.
BATTERY INSTALLATION
• Open the battery compartment door
• Install 2 batteries (UM-3 or "AA" size 1.5V) matching
the polarity as shown in the battery compartment.
• Replace the battery compartment door.
WWVB RADIO CONTROLLED TIME
The NIST (National Institute of Standards and
Technology) radio station (WWVB) is located in Ft.
Collins, Colorado. It transmits an exact time signal
continuously throughout the most of the continental United
States at 60 KHz frequency. The Color Changing
Projection Clock can receive this WWVB signal through
the internal antenna from up to 2,000 miles away. Due to
the nature of the Earth's ionosphere, reception can be
limited during the daylight hours. The radio controlled
clock will search for an alternate station that receives the
atomic time signal from the NIST Atomic clock in
Boulder, Colorado.
The WWVB tower icon on the unit's display will flash
indicating a radio signal reception from the WWVB
6
8
Hide quick links:
Advertisement
