Advertisement
7196.803/804/805 Top Mount
7196.805
5 HOLE
4" (102mm)
2"(51mm)
OPTIONAL
7-7/8"
(200mm)
8-1/8"
(206mm)
3-1/2"
(89mm)
DIA.
1-1/2"
(38mm)
12-1/4"
RAD.TYP.
(311mm)
19"
(483mm)
38"
(965mm)
1/2"
(13mm)
SEALING
COMPOUND
9-1/8"
(232mm)
5-3/4"
(146mm)
1-1/2 O.D. TAILPIECE
NOTES:
*
TEMPLATE PROVIDED WITH MOUNTING KIT 791001-100 FOR
EXPOSED FAUCET DECK OR UNDERCOUNTER FAUCET DECK
COUNTERTOP CUTOUT VARIATIONS.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL AND
COUNTERTOP SUPPORTS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the
range of tolerances established by ASME Standard A112.19.4
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided leaflet.
© 2008 AS America Inc.
FINISHED WALL
C/L
OR SPLASHBACK
3/16"
1-1/2" (38mm) DIA.
(5mm)
HOLES TYP.
4" (102mm)
4" (102mm)
2-1/8"
4"(102mm)
(54mm)
7196.804
4 HOLE
22"
(559mm)
*
CUTOUT NOTE
11-1/8"
(283mm)
COUNTERTOP
(BY OTHERS)
7-1/8"
(181mm)
5-3/4"
(146mm)
36" (914mm)
SUGGESTED
FINISHED
FLOOR
NOTES:
*
COUNTERTOP CUTOUT 527mm x 933mm x 25mm RADIUS
(20-3/4 X 36-3/4 WITH 1" RADIUS) AT CORNERS.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL AND
COUNTERTOP SUPPORTS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the
range of tolerances established by ASME Standard A112.19.4
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided leaflet.
Undercounter Mount
7196.805
5 HOLE
4"(102mm)
2" (51mm) OPTIONAL
7-7/8"
(200mm)
8-1/8"
(206mm)
3-1/2"
(89mm)
DIA.
1-1/2"
(38mm)
12-1/4"
RAD.TYP.
(311mm)
19"
(483mm)
(965mm)
SEALING
COMPOUND
9-1/2"
(241mm)
5-3/4"
(146mm)
1-1/2" O.D.
TAILPIECE
G20
SILHOUETTE™ 38"
DUAL LEVEL SINK
AMERICAST
FINISHED WALL
1-1/2"
C/L
OR SPLASHBACK
3/16"
(38mm) DIA.
(5mm)
HOLES TYP.
2-1/8"
4"(102mm)
4"(102mm)
(54mm)
4"(102mm)
7196.804
4 HOLE
22"
(559mm)
MOUNTING CLIP
(SEE DETAIL)
11-3/16"
DETAIL OF MOUNTING CLIP
(KIT No.791001 -100)
(284mm)
BRASS INSERT
*
CUTOUT
SINK
NOTE
38"
COUNTERTOP
(BY OTHERS)
REFER TO INSTRUCTIONS
PROVIDED WITH KIT FOR
ADDITIONAL INFORMATION
7-1/2"
(191mm)
5-3/4"
(146mm)
36" (914mm)
SUGGESTED
FINISHED FLOOR
Revised 2/08
®
"
3/4
MIN.
CLIP
MACH.
SCREW
Advertisement
