Miscellaneous Scanner Parameters; Transmit Code Id Character; Prefix/Suffix Values - Motorola Symbol LS4208 Product Reference Manual

Miscellaneous Scanner Parameters

Transmit Code ID Character

A Code ID character identifies the code type of a scanned bar code. This may be useful when the scanner is
decoding more than one code type. In addition to any single character prefix already selected, the Code ID
character is inserted between the prefix and the decoded symbol.
Select no Code ID character, a Symbol Code ID character, or an AIM Code ID character. For Code ID Characters,
see Symbol Code Identifiers on page B-1
Symbol Code ID Character

Prefix/Suffix Values

A prefix and/or one or two suffixes can be appended to scan data for use in data editing. To set a value for a prefix
or suffix, scan a four-digit number (i.e., four bar codes from
that value. See Table E-1 on page E-1
When using host commands to set the prefix or suffix, set the key category parameter to 1, then set the 3-digit
decimal value. See
To correct an error or change a selection, scan Cancel on
NOTE To use Prefix/Suffix values, first set the
and
*
None
for the four-digit codes.
Table E-1 on page E-1 for the four-digit codes.
Miscellaneous Scanner Options 13 - 3
AIM Code Identifiers on page
AIM Code ID Character
Appendix D, Numeric Bar
page D-3.
Scan Data Transmission Format on page
B-2.
Codes) that corresponds to
13-4.