Setup Field(S) - Motorola Symbol LS4208 Product Reference Manual

14 - 26 Symbol LS4208 Product Reference Guide

Setup Field(s)

Setup Field(s) Definitions
Table 14-2
Parameter
Move Cursor
Move Cursor to a Character
Move Cursor to Start of Data
Move Cursor Past a Character
Move Cursor Past a Specific String
Move Cursor to Specific String and
Replace
Move Cursor to Last Occurrence of
String and Replace All
Skip to End
Description
Scan the Move Cursor To Character bar code on page
then any printable ASCII character from the
Keyboard. When this is used, the cursor moves to the position
after the matching character. If the character is not there, the
rule fails and ADF tries the next rule.
Scan this bar code to move cursor to the beginning of the data.
This parameter moves the cursor past all sequential
occurrences of a selected character. For example, if the
selected character is 'A,' then the cursor moves past 'A,' 'AA,'
'AAA,' etc. Scan the Move Cursor Past Character bar code on
page 14-27, then select a character from the
Keyboard. If the character is not there, the cursor does not
move (i.e., has no effect).
This action moves the cursor past the first occurrence of a
selected string. Scan Move Cursor Past Specific
select the character(s) (up to 10) using the
Keyboard. Scan the Move Cursor Past Character bar code
on page 14-27.
This action moves the cursor to the first occurrence of a
selected string and replaces the string with another
user-defined string. Scan Move Cursor to Specific String and
Replace, then enter an alphanumeric string representing the
character(s) (up to 10) to match and delete using the
Alphanumeric Keyboard. Scan the
another alphanumeric string representing the character(s) (up
to 10) to insert using the Alphanumeric
of Message.
This action replaces all occurrences of a selected string with
another user-defined string, and moves the cursor to the
beginning of the last occurrence. Scan
Occurrence of String and Replace
alphanumeric string representing the character(s) (up to 10) to
match and delete using the
End of Message. Enter another alphanumeric string
representing the character(s) (up to 10) to insert using the
Alphanumeric Keyboard. Scan
Scan Skip to End to move the cursor to the end of the data.
Alphanumeric
Alphanumeric
String, then
Alphanumeric
End of Message. Enter
Keyboard. Scan
Move Cursor to Last
All, then enter an
Alphanumeric Keyboard. Scan the
End of Message.
Page
14-27, 14-27
14-27
14-27
14-27
14-28
End
14-28
14-28