Sanyo PLC-XF35 Service Manual page 12

A
E
C
C
D
D
C
C
C
D
D
D
D
D
C
D C
GX4
GX4
Adjustable foot.
Adjustable foot.
A
Assembly fan
A
FN909
C
C
C
C
FN911 FN912
E
E
E
E
E
E
E
A
A
B
B
B
C
B
B
B
A
B
A
B
B
F
F
F
F
F
F
7.
A
1. Remove 4 screws A and remove the fans (FN909 and FN910).
B
2. Remove 4 screws B and remove the assembly fan.
3. Remove 4 screws C and remove the fans (FN911 and FN912).
B
B
B
8.
Fans(FN903, FN904, FN905, FN907 and FN908),
AC SW unit, Handle and Adjustable feet removal.
A
Caution :
(1).Be careful of the attachment direction of Fan(FN908). See arrow mark in
a figure. (The fan's attachment direction is special significance
instruction to product safety. If attachment direction of fan make a
mistake, the projector overheats and result in fire hazard. )
(2).Mark the Fans as they are removed from the cabinet bottom so that they
may be reassembled in the same location from which they were removed.
1. Remove 5 screws A and remove the duct for FN907 and remove the Fan (FN907).
2. Remove 9 screws B and remove the Fans (FN903 and FN904) and remove the duct
for FN903/4.
3. Remove 8 screws C and remove the holder for FN908 and remove the Fan
(FN908).
4. Remove 8 screws D and remove the holder for FN905 and remove the Fan
(FN905) and remove the duct for FN905.
5. Remove 8 screws E and remove the AC switch unit.
6. Remove 4 screws F and remove 2 pins F and remove the handle.
7. Remove 8 screws G and remove the adjustable feet.
-12-
Fans(FN909, FN910, FN911 and
FN912) removal.
The following caution is special
significance to product safety.