LG MFL67652408 Owner's Manual page 22

22 INSTALLATION
6. If the projection is rectangle-shaped,
1
Enlarge the projection to fit the screen size
Insert the hex wrench into the hole as illustrated (left) and turn it clockwise to enlarge the size
of the projection.
2
To move the projection to the left
Insert the hex wrench into the hole as illustrated (left) and turn it counterclockwise to move the
projection to the left.
3
To move the projection to the right
Insert the hex wrench into the hole as illustrated (left) and turn it clockwise to move the projec-
tion to the right.
CAUTION
y If you are using a paper screen, align the paper screen with the projection and
y
reattach it to the wall rather than moving the projection to the left or right.