Advertisement
25
Check that the right and left sides of the screen are parallel to the wall using a
leveler.If it is not parallel to the wall, calibrate the screen angle using the space
steels.
Unhang the screen and remove the fixed rings and magnets.
Calculate the amount of space steels to be used using the formula below, locate
the space steels between the wall and the rings/magnets and fix them again, and
align the screen to be parallel to the wall.
(0.1° → 2 mm → 1 space steel)
<Left side>
Horizontal
❶ Horizontal
❷ 0.2 °j Move to the next hole
❸ 0.3°-0.4 °jSkip 2-3 holes
<Right side>
❶
❷
❸
Vertical
0.1 j Insert 2 space steels
0.2 j Insert 3-4 space steels
INSTALLATION
Vertical
15
Advertisement
