Advertisement
18
INSTALLATION
Ez Bracket Adjustment Guide
1. Reset projection
* Press the Edge Adj button on the remote control and select Reset.
(Select Settings → OPTION → Edge Adj → Reset to reset the position of the
projection.)
OPTION
• Language
• Caption
• Pointer
• Set ID
• PJT Mode
• Edge Adj
• Blank Image
?
2. Adjust the projection to fit within the screen
1
If the projection is too large
Insert the hex wrench into the hole as illustrated (left) and turn it counterclockwise to reduce
the size of the projection.
2
To move the projection to the left
Insert the hex wrench into the hole as illustrated (left) and turn it counterclockwise to move
the projection to the left.
3
To move the projection to the right
︿
: Off
: 1
: Front
: Blue
﹀
'
Advertisement
