TC-Helicon VoiceTone Harmony-G Product Manual page 12

Preset
6
3
#
7
48V
Manual Double
8 9 10
6. Preset Select Button and Preset Display
Press to cycle through the 5 presets numbered 1 to 5 shown
in the Preset display. Hold to store changes you make.The
sharp sign (#) is used in the Tuner and Manual modes.
7. 48 Volt Phantom Power LED
For condensor mics, hold the Manual and Double buttons
for 2 seconds to engage and disengage phantom power.
8. Manual Mode Button
Press to toggle guitar control of the harmonies. See how
to use this feature in the "For Advanced Users" section.
Hall Higher
Room High
Echo Low
Slap Lower
Combi Bass
SFX Octave
Stereo
FX Voice 1 Voice 2
11
9. Double Voice Button
Press this button to simulate the sound of you singing
along with yourself for added thickness.
12
10. FX Button and LED Display
Pressing the FX button cycles through the effect styles
and FX Off (no LEDs lit) for the current preset.
11. Stereo Select Button
Press and hold the Voice 1 and Voice 2 buttons for 2
seconds to toggle between stereo and mono output.
12.Voice Buttons and Display
Press either of the Voice 1 or Voice 2 buttons to:
a) change the associated voice's harmony interval
b) enable the harmony voice when its LED is off
c) turn the voice off
The same interval for both voices adds thickness to the
harmony voices.
Front Panel
13