TC-Helicon HarmonyControl Product Manual page 19

Manual Mode and the Setup Menu
Harmony mode (HM): If you have a Manual harmony
processor with Scale Select features, or you are using an
Auto-compatible unit in Manual mode you can set
which harmony mode you wish to use, Scale (1) or
Chord (2) in this menu. A value of 0 is used only to
diagnose issues for customer support.
There is a convenient shortcut to Chord and Scale
swapping during normal operation outside of the Setup
menu. Press and hold both footswitches for a moment.
The display will show either CR (Chords) or SC (Scale)
to indicate the current
HarmonyControl should have detected your processor
or the Product ID must be set to number of a
processor with Scale Select capability in order for this
to work. Also, don't forget to set your processor to the
appropriate harmony mode preset.
MIDI sysex ID (ID): If your unit is Auto-compatible, yet
it appears not to work, you can check that this ID
number and the MIDI System Exclusive ID of your
harmony processor are the same.
20
harmony mode.
Product ID Table:
Product
(Default - MIDI Chords only)
TC-H H elicon
VoiceLive
VoiceWorksPlus
VoiceWorks
Quintet
VoicePro
VoicePrism
Digitech
Access and Vocalist VR
Vocalist Workstation
Studio Vocalist
MIDI Vocalist
Vocalist VHM-5
Korg
Korg iH
ID
0
1
2
3
4
5
14
6
7, EX=8
9, EX=10
11
13
12