AT&T TL76108 User Manual page 29

Telephone operation
NOTES:
1. If the called handset does
not answer within 30
seconds, the outside call
returns to the telephone
base and is put on hold.
If the held call is not
resumed within five
minutes, the telephone
base rings and its screen
displays CALL ON HOLD
RING BACK! If the held
call is not resumed within
30 seconds, the call is
disconnected.
2. Pressing OFF/
CLEAR
the handset or CLEAR on
the telephone base will
temporarily silence the
intercom ringer.
Call transfer using intercom
At the telephone base:
Use the intercom feature to transfer an outside
call to any cordless handset in the system.
1. While on an outside call, press
/
INTERCOM
2. Press the
handset and press the OK softkey, or enter
the handset number (e.g. 1 for handset 1). The
called handset will ring, and its screen will
show TRANSFER FROM BASE.
On the ringing handset, press LINE 1
3.
LINE 2
/X-FER/
connected to the outside call.
If you want to intercom the desired handset
on
before the outside call is transferred, press the
HOLD softkey to put the outside call on hold and
follow the steps for Intercom on page 24. After
the end of the intercom call, resume the outside
call by pressing the corresponding line button and
follow the steps on this page to transfer the call.
/TRANSFER on the telephone base.
or softkey choose the desired
SPEAKER, or
/
FLASH,
INTERCOM and it will automatically be
26
,
/
FLASH