Before You Begin - Razor Powerwing Black 20036012 Owner's Manual

BEFORE YOU BEGIN

Remove contents from box and check parts against part diagram below. Remove the foam separators that protect the
components from damage during shipping. Inspect the contents of the box for scratches in the paint, dents or kinked
cables that may have occurred during shipping. Because the PowerWing™ was partially assembled and packed at the
factory, there should not be any problems, even if the box has a few scars or dents.
❑ Estimated Assembly and Set-Up Time
Razor recommends assembly by an adult with experience in bicycle mechanics.
®
Allow up to 15–20 minutes for assembly.
Brake
Handlebar
assembly
Folding mechanism
❑ Required Tools
Tools needed to assemble are included.
(2) 5mm hexagonal key
(included)
wrenches
Need Help? Visit our web site for replacement parts, product support and a list of authorized service
centers at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM
Pacific Time.
Hexagonal
bolt
wrenches
Rear foot platform (right)
Frame
Rear foot platform (left)
Coupling bolt
Rear caster wheel
2
WARNING: DO
NOT USE NON-RAZOR
®
PRODUCTS WITH YOUR
POWERWING™.
The PowerWing™ has been
built to certain Razor design
®
specifications. The original
equipment supplied at the time of
sale was selected on the basis of
its compatibility with the frame,
fork and all other parts. Certain
aftermarket products may or may
not be compatible.