Quick Setup Guide (Ux-66U Only) - Sharp FO-77 Service Manual

FO-77U
UX-66U

[6] Quick setup guide (UX-66U only)

QUICK SETUP GUIDE
1
Remove the packing paper.
1. Grasp the finger hold and pull
up to open the operation panel.
3. Remove the tape
and packing paper.
3
Plug the power cord into
a 120 v, 60Hz, grounded
AC (3-prong) outlet.
6
Load the thermal paper.
1. Grasp the finger hold and pull up
to open the operation panel.
4. Insert the leading edge of the paper
into the slot. Push the paper through
until it comes out the opening on the
front of the machine.
UX-66 FAX
2. Flip up the front paper guide.
4. Flip down the front paper guide
and close the operation panel.
4
Connect the telephone
line cord to the TEL. LINE
jack and a wall telephone
jack.
2. Flip up the front paper guide.
Press the knob to make
sure the front side of the
metal guide is down.
5. Make sure the paper comes out
straight, and then flip down the
paper guide.
1 – 10
Note: To enter your name and fax number and set the date
and time so that they appear on the automatic cover sheet,
see pages 19 - 25 of your operation manual.
2
Connect the handset
and place it on the
handset rest.
Note: Make sure that the area
in front of the machine is clear.
5
Attach the document
support.
3. Unwrap the roll of thermal paper
and place it in the compartment.
YES
NO!
6. Close the operation panel,
making sure it clicks into
place.
(TCADZ2869XHZZ)