Advertisement
<2>Pull out the upper paper tray of the stand/paper drawer until it stops
and attach the front mounting plates using a supplied screw for each.
Then, remove the lock of the paper tray and close the tray.
Remove the locks of the middle tray and the lower tray similarly.
Front mounting
plate
Screw
<3>Reattach the paper tray of the main unit.
5) Connect the power supply unit harness to the PCU PWB of the main
unit of the printer.
<1>Remove the screw that fixes the harness cover of the main unit of the
printer and slide the harness cover up to remove it.
Process the harness cover as shown in the illustration.
Cut out.
<2>Connect the optional power supply harness connector to CN11 (red
connector) of the PCU PWB of the main unit of the printer.
CN11
Front
mounting plate
Screw
Screw
Harness cover
Connector
AR-D15/D20 UNPACKING AND INSTALLATION 4-2
6) Reattach the harness cover to its original position and fix it with the
removed screw.
At this time, ensure that the optional power supply unit harness is
arranged as shown in the illustration.
•Fix the harness securely to the wire saddle.
Optional power
supply harness
Wire saddle
7) Connect the AC cord of the power supply unit to the main unit of the
printer.
Connect the AC cord of the power supply unit to the outlet connector
of the main unit of the printer at the location shown in the illustration.
AC cord
*
If another peripheral device must be installed, carry out the following
step at the end of the installation work.
Screw
Harness cover
Wire saddle
Advertisement
