Fuse Replacement - Honda EX5500 Owner's Manual

Fuse replacement
If the fuse is blown, the engine will not start until it is replaced.
1. Pull the lock levers out and open the top cover.
2. Turn the engine switch OFF.
3. Remove the fuse holder and replace the fuse. Use only a 10A fuse.
4. Close the top cover.
CAUTION:
If frequent fuse failure occurs, determine the cause and correct the problem
before attempting to bperate the generator further.
Never use a fuse with a rating other than 10A. Serious damage to the
electrical system or a fire may result.
FUSE HOLDER
23