Table of Contents
Advertisement
%#4'
Keep the system dry; if it gets wet, wipe it dry immediately.
Use and store the system only in normal temperature
environments. Handle the system carefully; do not drop it.
Keep the system away from dust and dirt, and wipe it with a
damp cloth occasionally to keep it looking new.
Modifying or tampering with the system's internal
components can cause a malfunction and might invalidate
its warranty and void your FCC authorization to operate it. If
your system is not performing as it should, take it to your
local RadioShack store for assistance.
%
"
"
.'#0+0)
6*'
6
/*
"2
#2'
#0&.+0)
Dirt, dust or particles of the tape's coating can accumulate
on the tape heads and other parts that the tape touches.
This can greatly reduce the performance of the cassette
player. After every 20 hours of tape player operation, follow
these steps to clean the tape-handling parts or use a
RadioShack cassette deck cleaning kit.
1. Disconnect AC power.
2. Open the cassette compartment door and press PLAY
to expose the tape-handling parts.
3. Use a cotton swab dipped in denatured alcohol or tape
head cleaning solution to clean the tape guides, record/
play head, erase head, pinch roller, and capstan.
Tape Guides
Record/Play Head
Erase Head
4. When you finish cleaning, press
close the cassette compartment door. Then reconnect
power.
#465
Capstan
Pinch Roller
ª
and
STOP/EJ.
.
.
"%#76+10"
( Continued )
Removing the erase-protection
tabs does not prevent a bulk eraser
from erasing a cassette tape.
17
Advertisement
Table of Contents
