Radio Shack CDG Karaoke System Owner's Manual page 10

± ±
"016'" "
• If your television or optional
monitor does not have the
required video input/output jack,
you might need a radio
frequency modulator (not
supplied).
• You must change your TV or
optional monitor's source
selection to AUX IN or VIDEO
IN when connecting your
karaoke system to an AUX IN or
VIDEO IN. Refer to your TV or
optional monitor's instructions
manual for details.
10
To see the words from a CDG on a TV or optional monitor,
plug one end of the supplied yellow RCA cable into
and the other end into your TV or monitor's video input
OUT
jack. You can only view video from the karaoke system on
the connected TV; you cannot view video from another
optional video component. ±
%100'%6+0)"61"219'4
When you have made all other connections, plug your
system's power cord into a standard AC outlet.
% "
100'%6+0) #0
If you want to connect an external speaker (not supplied),
connect a speaker to the
jack on the back of the system. The external speaker should
have an impedance no less than 8 ohms and be able to
handle 15 watts.
% " "5
100'%6+0) #
Connect a stereo VCR's left and right audio output (AUX
OUT) to the system's
AUX IN L
Connect a VCR's video out to the Karaoke's
5+0)+0)"#.10)
1. Press to turn on the system. The POWER
POWER
indicator lights.
2. If you play a CDG or CD, slide
.
CDG/CD
If you play a cassette tape, slide
.
TAPE
If you connect an optional audio component, slide
to
FUNCTION SELECT
±
± ±
"' "5
:6'40#. 2'#-'4
RIGHT CHANNEL OUTPUT 8
"8%4
6'4'1
and jacks.
R
VIDEO IN
FUNCTION SELECT
FUNCTION SELECT
.
AUX
VIDEO
15W
jack.
to
to