Radio Shack CDG Karaoke System Owner's Manual page 14

± ±
"016'" "
Intro Scan
• To exit intro scan, you must
press INTRO again, open the
CD compartment, or turn off the
karaoke system.
• You can use repeat play during
intro scan.
Program Play
• You can program up to 19
tracks. When the 19th track is
¶ý¶ý ¶ý¶ý ¶ý¶ý ¶ý¶ý
programmed, flashes and
you cannot program more
tracks.
• You can use intro scan and
repeat play during program
play.
14
To start intro scan from the first track , press
« « « «
. Then press when the disk is stopped.
INTRO
To start intro scan while a CD is playing , press
the first 10 seconds of play to start intro scan from the
current track. Press
INTRO
to start intro scan at the beginning of the next track.
The system stops after the last track is scanned. Press
to exit intro scan. To stop scanning while a CD is
INTRO
playing, press and the system resumes normal play
INTRO
with the current track. ± ±
± ±
2 "2
41)4#/ .#;
You can program the CDG/CD player to play up to 19 tracks
in any order you choose. You can program the same track
to play more than once.
* * * *
1. Press . The PLAY/PAUSE indicator turns off.
STOP
2. Press . The PROGRAM indicator and
PROGRAM
flash.
% &
3. Press or
SKIP
selected track number and the PROGRAM indicator
flash.
4. Press to store the selected track, the
PROGRAM
PROGRAM indicator and 0 continue flashing.
5. Repeat Steps 3 and 4 to program up to 19 tracks. ±
«ý «ý «ý «ý
6. Press
PLAY/PAUSE
The first track number you selected appears on the
display and the PROGRAM indicator continues to flash.
7. Program play automatically stops at the end of the last
programmed track. To stop program play sooner, press
* * * *
. If you press
STOP
exit the programming mode, and all programmed tracks
are lost.
4GXKGYKPI14GRNCEKPI"C"
2TQITCOOGF"5GSWGPEG
1. While play is stopped, repeatedly press
review the programmed track numbers.
2. To replace a programmed track, repeatedly press
until the desired programmed track number
PROGRAM
flashes. The PROGRAM indicator continues to flash.
PLAY/PAUSE
INTRO
after the first 10 seconds of play
to select the desired track. The
to play the programmed tracks.
* * * *
during programming, you
STOP
PROGRAM
during
& & & &
± ± ±
to