Fujitsu PRIMERGY SX960 S1 Operating Manual page 50

Optional: Installation of a BBU
Connecting the BBU cable
Figure 19: Connecting the BBU cable
Ê Plug the BBU cable in the connector on the BBU board (see pos. 1 in
figure 19).
I
The plug of the BBU cable has a number printed on the back. Make
sure this side of the plug faces down, i.e. is not visible.
Ê Check whether the cable of the battery is connected to the BBU board (see
pos. 2 in figure
50
19).
Operating Manual
SX960 S1