Using The Ez Sync Hdavi Control - Panasonic SA-PT650P Service Manual

SA-PT650P / SA-PT650PC
7.3.

Using the EZ Sync HDAVI Control

SKIP
What is EZ Sync HDAVI Control?
EZ Sync HDAVI Control is a convenient function that offers linked
operation of this unit and Panasonic TV (VIERA) with EZ Sync HDAVI
Control. You can use this function by connecting the equipment with the
HDMI cable. For operational details, see the operating instructions of the
connected equipment.
This unit supports "HDAVI Control 2" function.
The TV with "HDAVI Control 2" function enables the following operation:
EZ Sync Control only with TV s remote control (for "HDAVI Control 2")(
Preparation
Confirm that the HDMI connection (
Set "EZ Sync" to "On" (
To complete and activate the connection correctly, turn on all EZ Sync
HDAVI Control compatible equipment and set the television to the
corresponding HDMI input mode for the home theater system.
Whenever the connection or settings are changed, reconfirm the points
above.
One touch play
You can turn on the home theater system and television, and start playing
the disc in the play position with a single press of a button.
Press [ONE TOUCH PLAY].
Theater speakers will be automatically activated (
This function also works if you press [
remote control during home theater standby mode.
[Note]
Playback may not be immediately displayed on the television. If you miss
the beginning portion of playback, press [
where playback started.
Auto input switching
When you switch the television input to:
TV tuner mode, the home theater system will automatically switch to
"AUX".
HDMI input mode for the home theater system, the home theater
system will automatically switch to "DVD/CD" if it is in "AUX " mode.
When you start disc play, the television will automatically switch to the
HDMI input mode for the home theater system.
TV
DVD
TV/VIDEO VOLUME
TUNER/BAND
EXT-IN
3
1 2
ONE TOUCH PLAY
4 5 6 ONE TOUCH PLAY
VOLUME
7 8 9
DISC
0
10
SKIP SLOW/SEARCH
SLOW/SEARCH
STOP PAUSE PLAY
PLAY
TOP MENU MENU
DIRECT PLAY LIST
NAVIGATOR
ENTER
-RETURN
FUNCTIONS -SETUP
2ND
-EQ -SW.LEVEL
CANCEL -CD MODE -SLEEP SELECT
PL FL DISPLAY PLAY MODE MUTING
S.SRD
-TEST -CH SELECT
OI page 6) has been made.
OI page 24, "HDMI" menu).
right ).
PLAY ] on the home theater
] or [ ] to go back to
Speaker control
You can select whether audio is output from the home theater system or
the television speakers by using the television menu settings. For details,
refer to the operating instructions of your television.
Home theater
Theater speakers are active.
When the home theater system is in standby mode, changing the television
speakers to theater speakers in the televison menu will automatically turn
the home theater system on and select "AUX" as the source.
The television speakers are automatically muted.
You can control the volume setting using the volume or mute button on
the TV s remote control. (The volume level is displayed on the main
unit s FL display.)
To cancel muting, you can also use the home theater remote control
( OI page 10).
If you turn off the home theater system, television speakers will be
automatically activated.
TV
Television speakers are active.
The volume of the home theater system is set to "0".
This function works only when "DVD/CD" or "AUX " is selected as the
source on the home theater system.
Audio output is 2-channel audio.
When switching between the theater and television speakers, the TV
screen may be blank for several seconds.
Power off link
When the television is turned off, the home theater system goes into
standby mode automatically.
This function works only when "DVD/CD" or "AUX" is selected as the
right) source on the home theater system.
When the television is turned on, the home theater system does not turn
on automatically. (Power on link is not available.)
[Note ]
Only the home theater system turns off when you press [ ] for shutting it
down. Other connected equipment compatible with EZ Sync HDAVI
Control stay on.
EZ Sync Contol only with TV's remote
control (for "HDAVI Control 2")
You can control the disc menus of the home theater system with the TV s
remote control when using the
TV s remote control, refer to the below illustration for operation buttons.
1 Select the theater operation menu by using
the television menu settings.
(For details, refer to the operating instructions
of your television.)
The home theater system will automatically
switch to "DVD/CD" if it is in "AUX" mode.
2 Select the desired item.
"TOP MENU": Shows a disc top menu
(
program list (
"MENU": Shows a disc menu
(
list ( OI page 19).
"Control P anel": The basic operations for
discs are available.
[Note]
Depending on the menu, some button operations cannot be performed
from the TV s remote control.
"Control Panel" can be selected directly by using a button on the TV s
remote control (e.g. [SUB MENU]).
16
t "DVD/CD" source. When operating the
EZ Sync
OI page 15, 18)
or
TOP MENU
OI page 19).
MENU
Control Panel
OI page 15, 18)
or play
PAUSE
SKIP
STOP
ENTER/
PLAY
RETURN
PLAY
SKIP
RETURN