Panasonic SA-PT650P Service Manual page 31

8.2.7. User Operation Flow
START
Is Tx card
inserted?
N
Insert Tx card
POWER ON MAINSET
Is there audio
source playing?
N
Play music
Is music heard on
wireless surround
speaker?
Y
DONE
8.2.8. Baseband Settings Update from EEPROM IC
· The software will read from an external EEPROM IC to get the selected baseband IC settings. Not all baseband register
settings (a total of 512 bytes) will be read from the EEPROM IC, though. Aside from getting the baseband settings from the
EEPROM IC, it is also used to enable FCC testing, select the application type and entering into doctor mode (this can be
enabled also by sending a command via the main unit).
8.2.9. Doctor Mode
· For normal operation but automatic frequency selection is disabled, it can enter into Doctor Mode. This feature is hidden from
normal user and will be used by the service center to fix to a particular RF Channel. With doctor mode, the user can disable
frequency automatic allocation and sniffer and be able to select a fix RF Channel (Channels 1, 2 or 3) by a combination or
remote control keys. Refer to Section 9.4 for Wireless Doctor Mode.
Y
Y
N
Press FF Key in Mainset and 3 key
on remocon until "P" led displays
TX-RX probably not
paired. Do ID setting
process
Press ID set button on receiver
Is wireless link led
blinking?
A
Y
Y
Is wireless link led
blinking?
N
31
SA-PT650P / SA-PT650PC
CHECK FOR SPEAKER
WIRE CONNECTIONS
Is wireless
receiver on?
Power on receiver
A
Repeat ID set
process