Troubleshooting - Olympus VN-733PC User Manual

Troubleshooting

Problem
The display is blank.
Unable to operate the
voice recorder.
Unable to record.
Playback is inaudible.
Unable to erase a file.
Unable to write index
marks/temp marks.
The PC is unable to
recognize the voice
recorder.
Possible cause
The battery is not inserted
properly.
The remaining battery power
is low.
The power is OFF.
The remaining battery power
is low.
The power is OFF.
The voice recorder is in HOLD
mode.
There is no remaining memory.
The maximum number of
recordable files has been reached.
The earphones are connected to
the EAR jack.
The volume is set to [00].
The file is locked.
The file is a read-only file.
The maximum number of marks
(99) has been reached.
The file is locked.
The file is a read-only file.
VN-733PC model only
[AC Adapter] has been selected
for [USB Settings].
Solution
Check that the positive and negative
terminals of the battery are placed
correctly (☞ P.8).
Replace the battery (☞ P.8).
Turn the power ON (☞ P.9).
Replace the battery (☞ P.8).
Turn the power ON (☞ P.9).
Release HOLD mode (☞ P.13).
Erase unneeded files (☞ P.32).
Select another folder (☞ P.15).
To output the playback through the built-
in speaker, disconnect the earphones.
Adjust the volume (☞ P.24).
You must unlock the file before you can
erase it (☞ P.37).
Unlock the file, or undo the read-only
setting on a PC.
Erase unneeded marks (☞ P.31).
Unlock the file (☞ P.37).
Unlock the file, or undo the read-only
setting on a PC.
Select [PC] for [USB Settings] (☞ P.47).
6
EN
55